Help With Rotors Anyone?

[HollywoodBush]

So I finally have on order two brand new rotors for the Honda. I hope this will solve the problem:fingersx I do not have a front stand for my bike and would like to see if anyone would like to help me out and wrench on the bike. Like to bring it by and see if you can help me install the new rotors, if it does not solve the problem then look into what else may cause this problem. Sooo....any offers?:thumb

[Vtec44]

How bout we make it a BBQ at your place? :D

[Asian Dave]

Come over.

[HollywoodBush]

How bout we make it a BBQ at your place? :D

Haha! Hmmm no?:fawkdance

[HollywoodBush]

Come over.

You have a front stand for my Honda?:ohyaaa

[Asian Dave]

I have a Pit Bull front stand. It'll work w/ any bike.

[Vtec44]

My offer still stand with or without the BBQ. :D There's only requirement though, you need to have your own garage space. Mine is a mess right now and there's no room for anything else other than a shit load of boxes and other junks.

[HollywoodBush]

Sweet....I thought you needed a certain pin# for certain models. I only have rear spools no front.

[HollywoodBush]

My offer still stand with or without the BBQ. :D There's only requirement though, you need to have your own garage space. Mine is a mess right now and there's no room for anything else other than a shit load of boxes and other junks.

See I would not have a problem with that but I do not have a garage LOL!

[Asian Dave]

Sweet....I thought you needed a certain pin# for certain models. I only have rear spools no front.


Only if you get the front stand that lifts at the head tube. That stand is great/needed if you're gonna take off the forks.

The regular front stand lifts at the forks.

http://www.heavybus.com/K8/maint/photos/Wheels_RR/front_off.jpg

[HollywoodBush]

Sweet! Okay....when you free David? Weekends? Time?

[Cookiebug79]

I'll help you, but you'll have to pay me in sex. And nothing gets PIAB. So that's probably a deal breaker for you.

:-p

[Vtec44]

so BBQ at Dave's?

[HollywoodBush]

I'll help you, but you'll have to pay me in sex. And nothing gets PIAB. So that's probably a deal breaker for you.

:-p

Damn not even with lube?! So close to sealing the deal with ya!! Hmmm how are you with dome?

You got all the tools? I know you got the stands since you got the new track bike.:thumb

[Asian Dave]

I'm free Saturday, during the day. Bill's having a BBQ starting at 3. We could do that then go over there. But I gotta head out at like 7.

[HollywoodBush]

so BBQ at Dave's?

Looks like it....what ya brining?

[HollywoodBush]

I'm free Saturday, during the day. Bill's having a BBQ starting at 3. We could do that then go over there. But I gotta head out at like 7.

I don't think it will ship in time for me to get it this weekend but I will keep you updated.

[Vtec44]

Looks like it....what ya brining?


Just myself and an empty stomach. :D

[HollywoodBush]

Rotors being delivered on Saturday. :woot

[Vtec44]

:woot

[HollywoodBush]

Now I gotta wait a couple weeks before I can put them on....I will be gone next weekend so I have to do it the next weekend, if David has time to squeeze me.

[HollywoodBush]

I would like to thank Dave and Christian for helping me out this weekend. I rode today and everything is working great, hopefully I will not warp the rotors again.

[Asian Dave]

Sweet! So hopefully the new rotors corrected everything.

[HollywoodBush]

Yeah it did, everything is working beautiful. Not sure how I warped the rotors but it was a problem that I had with them. Maybe I should take them to see which one is warped and see of they can be machined?

[Asian Dave]

Are you gonna keep the old ones?

[HollywoodBush]

Yeah I still have the old ones stored away.

[Asian Dave]

Get em' turned and keep em' as back up.

[HollywoodBush]

Know anyone?

[Asian Dave]

Nope.

Although Christian said Polo (?) at Moto Technica did his. Might be a drive for you.

[HollywoodBush]

yeah that is a bit of a drive.

[Asian Dave]

Maybe someone else knows of someone in your area.

[HollywoodBush]

FYI to all who cares: David and Christian ( supervisor ) helped to changed my rotors, thank you very much! It did help the problem....I say this because it solved the problem for a couple weeks and now once again the brakes shutter/pulse when I hit the front brakes. I am at a loss as what it could be??

[Vtec44]

did you guys flush out the break fluid while you were at it?

[HollywoodBush]

Nope they were already flushed once this year. You think that is the problem?

[Vtec44]

I doubt it but I'd do it anyway to cross that off of my list of possibilities. That and brake pads.

[HollywoodBush]

Pads and fluid were changed at the same time a few months ago....switched to Galfer pads. This is driving me crazy!

[HollywoodBush]

Anyone want to buy a 2005 600RR?! LOL

[Vtec44]

Do you have someone that's willing to swap out the entire front wheel, rotors and everything? At least that will eliminate either the wheel or the font brakes. Also, double check the forks settings in case they don't match on either side. :dunno

[Cookiebug79]

Eric, how's your tire pressure? Tire tread? When't the last time your fork fluid was changed? Could you need a new head bearing?

I'll give you $1000 and a BJ for it :D

[Kid Death]

Eric, how's your tire pressure? Tire tread? When't the last time your fork fluid was changed? Could you need a new head bearing?

I'll give you $1000 and a BJ for it :D

man You'll give a bj for just about anything!

[HollywoodBush]

Do you have someone that's willing to swap out the entire front wheel, rotors and everything? At least that will eliminate either the wheel or the font brakes. Also, double check the forks settings in case they don't match on either side. :dunno


James...I don't actually have anyone. I am starting to think that maybe the fluid or pads maybe the problem. When I switched them out everything was okay but it wasn't till a week or so later when I took it to ACH it started to do this. It may be a coincidence:dunno

I think I will have to take it to Tige over at Cyclemall....I was kinda hoping I would find the problem but I am out of ideas.

[HollywoodBush]

Eric, how's your tire pressure? Tire tread? When't the last time your fork fluid was changed? Could you need a new head bearing?

I'll give you $1000 and a BJ for it :D

Pressure is good re-checked it last night. Dunlops put on maybe 8 months ago. I do not think the fork fluid has been changed in a year or two. I don't think so....?

LOL! Hmmm I am willing to work on that price for you. Lets talk about this over a BJ, let me know when.:naughty2

[Asian Dave]

Suxors.

GIXXXXXAR FTW!!

[HollywoodBush]

I know I am puzzled on this one...I think it is time to splurge and have Tige look at the Honda.