Air Intake

[nemessis45]

http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0813.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0807.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0808.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0803.jpg

[Vtec44]

Holy shit, that's pretty nice. Did you fabricate that? :notworthy

[nemessis45]

No it is a Ten Kate Cf racing intake($330.00 shipped for the Netherlands) but I did have a jig made so that it will bolt right up to staock faring stay and headlights. I will post pics of the bike put back together there is a little gap because it has no groove for the head lights to fit in. I am in the process of making a mold of this intake and will be making them out of fiberglass so to cut down the cost and also fit perfect with stock headlights and firing stay. If you go over to www.600rr.net (http://www.600rr.net) and look up 07-07 mods and then look up air intake you will see more about this project.

[Davey Cracker]

Nice... but why?

[nemessis45]

More air flow-weight-and Bling factor. You see alot of the cf intake once you pull off the plugs from your stock faring stay.
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0809.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0806.jpg

Mustang pics
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0812.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0811.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0810.jpg

[Davey Cracker]

More air flow
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0809.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0806.jpg

Mustang pics
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0812.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0811.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0810.jpg

Ahhhh... I take it you ride on higher speed tracks.

Gorgeous stang.

[Chas4RR]

If u make friends with those guys at Ten Kate - be sure and tell them about this super cool website, mkay? We could definitely do some beta testing for them!

[nemessis45]

More pics see the gap when the new intake is made the gap won't be there.
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0831.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0830.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0832.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0829.jpg

[Vtec44]

Maybe you can include a simple rubber seal with the final product. It can just be a small rubber tube, sliced open on one side that goes on to the rim of the intake. It may help with sealing the intake to the front fairing and to the airbox, in addition to reduce unecessary vibration.

[nemessis45]

The intake seals fine but there is no groove for the inside of the head light to fit into. I will get some pics up of the stock intake so you can see what I am talking about.

[nemessis45]

These are final product pics of the air intake and brackets. It took alot of work to get this far but the air intake turned out real nice. Can someone please post these up so you don't have to click on the link. Thanks

http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0966.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0967.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0969.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0968.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0972.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0937.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0938.jpg
http://i277.photobucket.com/albums/kk77/nemessis45/DSCF0939.jpg

[nemessis45]

I am selling the mold and jig once I get the first ten I have sold. PM me for a price if interested.

[Tornadom]

I am interested in an air intake for my bike. :thumb

[nemessis45]

Mold and jig are sold contact Clint at 815-499-2013 for custom air intakes for 07-08 600rr